Wiring Bench

Tools

Reference tables for the bench.

Humbucker lead colors by maker

For 4-wire humbuckers. The bare wire always goes to ground. The two joined leads are the series link: solder them together and tape them, or use them to split the coils. Makers change colors now and then, so if a lead doesn't match, find the coil pairs with a meter.

MakerHotJoined togetherGroundWhere this comes from
DiMarzioredblack + whitegreenDiMarzio's help page on 4-conductor pickups, and Bare Knuckle's colour code chart, which lists other makers, checked Nov 18, 2026
Seymour Duncanblackwhite + redgreenSeymour Duncan's article on humbucker wiring (updated Dec 2021), and Bare Knuckle's colour code chart, which lists other makers, checked Nov 18, 2026
Gibsonredwhite + greenblackBare Knuckle's colour code chart, which lists other makers, and Tonerider's chart, checked Nov 18, 2026
Fendergreenwhite + blackredBare Knuckle's colour code chart, which lists other makers, and Tonerider's chart, checked Nov 18, 2026
Bare Knuckleredgreen + whiteblackBare Knuckle's colour code chart, checked Nov 18, 2026
Fralinwhitered + greenblackBare Knuckle's colour code chart, which lists other makers, and Fralin's article on humbucker color codes, checked Nov 18, 2026
Toneriderredblack + whitegreenTonerider's color chart, checked Nov 13, 2026
EMG HZ (passive)redblack + whitegreenTonerider's color chart, which lists other makers, checked Nov 13, 2026
Ibanezredblack + whiteblueTonerider's color chart, which lists other makers, checked Nov 13, 2026
GFSgreenwhite + redblackTonerider's color chart, which lists other makers, checked Nov 13, 2026

Pot values

PickupsUsual pot
Single coils250k audio
P-90s250k or 500k audio
Humbuckers500k audio
Very dark humbuckers500k, or 1 meg for volume
Mixed single coils and humbuckers500k, or 250k for a warmer bridge humbucker

Audio taper is marked A, linear is marked B. Use audio for volume.

Cap markings

Printed on the capValueSame as
10310 nF0.01 µF
22322 nF0.022 µF
33333 nF0.033 µF
47347 nF0.047 µF
104100 nF0.1 µF

The first two digits are the value, the third is how many zeros to add, in picofarads. 223 is 22,000 pF, which is 22 nF.

Open a build code

Every wiring on the site has a build code. Paste one here to open it in the builder.