Wiring diagrams
Stock wiring for each guitar first, then the common mods. Every diagram opens in the builder if you want to change something.
Strat style
Three single coils, a 5-way blade, one volume and two tones.
Stock Strat style
Five sounds on a 5-way blade, with quiet mixes in 2 and 4.
Neck and bridge tones
Tone 1 works on the neck and middle, tone 2 on the bridge. The usual layout on newer Strats.
Strat 7-sound
Pull a knob to add the neck in any position: bridge plus neck, and all three.
7-sound on a toggle
A separate on/off switch adds the neck, for bridge plus neck and all three.
No-load neck tone
The neck tone knob drops out at 10 for a little more sparkle.
Tele style
Two pickups on a 3-way blade with a volume and a tone.
Les Paul style
Two humbuckers on a 3-way toggle with a volume and a tone for each. SG and 335 style guitars wire the same.
Stock Les Paul style
A volume and a tone for each pickup on a 3-way toggle. Pick 50s or modern tone wiring later.
Split both humbuckers
Pull either tone knob for a single coil sound from that pickup.
Series or parallel
Pull either tone knob to put that humbucker's coils in parallel: brighter, still quiet.
Shielded Les Paul style
50s wiring with copper foil in the control cavity against hum and buzz.
Jimmy Page style
Four push-pulls split each pickup, flip the neck's phase, or put both in series.
Superstrat
Humbuckers, or humbuckers and single coils, on a blade or a toggle.
HSS
HSH
HSH on a 5-way Super Switch
Positions 2 and 4 pair one coil of a humbucker with the middle.
HSH Super Switch, high-pass pull
The HSH Super Switch wiring with a high-pass filter on the volume pull. Vai style.
HSH Super Switch, stacked middle
For a stacked or rail middle: positions 2 and 4 pair one coil of the middle with an outer coil.
HH
HH on a 3-way blade
Bridge, both, or neck. One volume and one tone.
HH on a 3-way toggle
Neck, both, or bridge on a toggle. One volume and one tone.
HH on a mini toggle
A small on-on-on toggle picks neck, both, or bridge. One volume, no tone.
HH 3-way, one coil of each
The middle plays one coil from each humbucker, and the pair is quiet. Petrucci style.
HH 5-way, neck parallel
Bridge, one coil of each (quiet), both, the neck's coils in parallel, neck. Ibanez style.
HH 5-way, inside and outside coils
Positions 2 and 4 each play one coil of each humbucker, and both pairs are quiet.
HH toggle, split and high-pass
The tone knob splits both humbuckers and the volume pulls up a high-pass filter. Satriani style.
Neck humbucker, bridge single coil
One pickup
A single humbucker or P-90, no pickup selector.
One P-90
One P-90 with a volume and a tone knob.
One humbucker
One humbucker with a volume and a tone knob.
One humbucker, volume only
No tone knob. The brightest and simplest wiring.
One humbucker, 3-way mini
An on-on-on mini toggle: full humbucker, one coil, or both coils in parallel.
Series/parallel toggle
A small toggle sets one humbucker to full and thick, or bright and still quiet.
Famous builds
Wirings in the style of the players who made them famous.
Brian May style
Three pickups in series, each with its own on/off and phase switch.
Jimmy Page style
Four push-pulls split each pickup, flip the neck's phase, or put both in series.
7-sound on a toggle
A separate on/off switch adds the neck, for bridge plus neck and all three.
HH toggle, split and high-pass
The tone knob splits both humbuckers and the volume pulls up a high-pass filter. Satriani style.
HSH Super Switch, high-pass pull
The HSH Super Switch wiring with a high-pass filter on the volume pull. Vai style.
HH 3-way, one coil of each
The middle plays one coil from each humbucker, and the pair is quiet. Petrucci style.