Wiring Bench

How a 5-way blade switch works

Why there are five sounds from three pickups, and why 2 and 4 are quiet.

A Strat-style 5-way blade is really two switches stacked on one lever. Each half, called a pole, has a common lug and a lug for each position. One pole picks which pickups play. On a stock Strat the other pole picks which tone knob is in the circuit.

Positions 1, 3 and 5 connect one pickup each: bridge, middle and neck. Positions 2 and 4 sit between them, and the blade touches two lugs at once, so two pickups play together in parallel. That's the glassy, slightly scooped sound people know from these positions.

The switching chart for a stock Strat. Each column is a position.
The switching chart for a stock Strat. Each column is a position.

Why 2 and 4 are quiet

Single coils hum. In a stock Strat the middle pickup is reverse wound, reverse polarity (often written RWRP). On its own it hums like the others, but paired with the bridge or neck its hum is flipped against theirs and the two cancel. The guitar signal itself stays in phase, so you keep the sound and lose most of the hum.

If 2 and 4 sound thin and weak instead of full, the middle pickup is out of phase with its neighbors. Swap its two leads.

Next: Pots and caps: choosing values