Jimmy Page style
Hand-wired example, so it has no build code.
Switching
Parts
| Qty | Part | |
|---|---|---|
| 1 | Neck pickup: humbucker | |
| 1 | Bridge pickup: humbucker | |
| 1 | 3-way toggle | |
| 4 | 500k audio (A) push-pull pot (DPDT) | neck volume, bridge volume, neck tone, bridge tone |
| 2 | 22 nF (.022 µF, marked 223) capacitor | one per tone knob |
| 1 | Mono output jack | |
| 1 | Bridge ground wire | |
| 1 | Hookup wire, 22 AWG | two or three colors, plus bare or black for grounds |
| 1 | Solder and heat shrink or tape | for joined pickup leads |
About this wiring
Four push-pulls split each pickup, flip the neck's phase, or put both in series.
| Neck volume | Turns the neck pickup up and down. With more than one pickup on, all the way down cuts the whole guitar. |
| Bridge volume | Turns the bridge pickup up and down. With more than one pickup on, all the way down cuts the whole guitar. |
| Neck tone | Rolls off treble on the neck pickup. Down makes it warmer and darker. |
| Bridge tone | Rolls off treble on the bridge pickup. Down makes it warmer and darker. |
Wiring instructions
Get the parts ready
- Mount the 3-way toggle, Neck volume, Bridge volume, Neck tone, Bridge tone and Output jack where the drawing shows them. Face the pot lugs the way they're drawn.
- Tin every lug and every wire end with a little solder first. Scuff a spot on each pot back with sandpaper so ground wires take solder.
Grounds first
- Bare wire from Bridge volume pot back to Neck volume pot back.
- Bare wire from Neck tone pot back to Neck volume pot back.
- Bare wire from Bridge tone pot back to Neck tone pot back.
- Short wire from Bridge tone A down to Bridge tone pot back, or bend the lug down onto the pot back.
- Short wire from Bridge volume A up to Bridge volume pot back, or bend the lug down onto the pot back.
- Short wire from Neck volume lug 1 to Neck volume pot back, or bend the lug down onto the pot back.
- Short wire from Bridge volume lug 1 to Bridge volume pot back, or bend the lug down onto the pot back.
- Wire from 3-way toggle frame to Neck volume pot back.
- Wire from Output jack sleeve to Bridge volume pot back.
- Wire from Bridge ground wire to Bridge volume pot back. It runs through the body to the bridge, so leave it long.
Jumpers on one part
- Wire from Neck tone A down to Neck tone B up.
- Wire from Neck tone lug 2 to Neck tone A down.
- Wire from Neck tone A up to Neck tone B down.
- Wire from Bridge tone lug 2 to Bridge tone A up.
- Wire from 3-way toggle neck out to 3-way toggle bridge out.
Caps and resistors
- 22 nF cap: one leg on Neck tone lug 1, the other on Neck tone pot back. Caps have no right way round.
- 22 nF cap: one leg on Bridge tone lug 1, the other on Bridge tone pot back. Caps have no right way round.
Switch and pot runs
- Wire from Neck tone BC to Neck volume A up.
- Wire from Neck tone lug 2 to Neck volume lug 3.
- Wire from Bridge tone AC to Neck tone B down.
- Wire from Bridge tone lug 2 to Bridge volume lug 3.
- Wire from 3-way toggle neck in to Neck volume lug 2.
- Wire from Bridge tone B up to Neck volume lug 2.
- Wire from Bridge tone B down to Bridge volume lug 2.
- Wire from 3-way toggle bridge in to Bridge tone BC.
To the output jack
- Wire from Output jack tip to 3-way toggle bridge out.
Pickups last
- Neck humbucker bare lead to Neck volume pot back.
- Neck humbucker red lead to Neck tone AC.
- Neck humbucker black lead to Neck volume A up.
- Neck humbucker green and white leads to Neck volume AC.
- Bridge humbucker black and bare leads to Bridge volume pot back.
- Bridge humbucker red lead to Bridge volume lug 3.
- Bridge humbucker green and white leads to Bridge volume AC.
Check it with a meter
- Set the meter to ohms, on the 20k range (or auto).
- Guitar unplugged. Turn every volume and tone knob up to 10.
- Touch one probe to the jack tip and the other to the sleeve, or plug a cable in and touch its tip and sleeve.
- Click through each switch position and compare with the table. Within about 15 percent is fine: every pickup reads a little different.
- Turn the volume to 0: the reading should drop to almost nothing. If it doesn't, check the volume lugs.
| Position | Plays | Expect |
|---|---|---|
| 3-way toggle 1 (neck (up)), Neck volume down (neck full), Bridge volume down (bridge full), Neck tone down (in phase), Bridge tone down (parallel) | neck | about 7.5k ohms |
| 3-way toggle 1 (neck (up)), Neck volume down (neck full), Bridge volume down (bridge full), Neck tone down (in phase), Bridge tone up (series) | bridge in series with neck | about 15.4k ohms |
| 3-way toggle 1 (neck (up)), Neck volume down (neck full), Bridge volume down (bridge full), Neck tone up (neck reversed), Bridge tone down (parallel) | neck | about 7.5k ohms |
| 3-way toggle 1 (neck (up)), Neck volume down (neck full), Bridge volume down (bridge full), Neck tone up (neck reversed), Bridge tone up (series) | bridge in series with neck | about 15.4k ohms |
| 3-way toggle 1 (neck (up)), Neck volume down (neck full), Bridge volume up (bridge split), Neck tone down (in phase), Bridge tone down (parallel) | neck | about 7.5k ohms |
| 3-way toggle 1 (neck (up)), Neck volume down (neck full), Bridge volume up (bridge split), Neck tone down (in phase), Bridge tone up (series) | bridge north coil in series with neck | about 11.5k ohms |
| 3-way toggle 1 (neck (up)), Neck volume down (neck full), Bridge volume up (bridge split), Neck tone up (neck reversed), Bridge tone down (parallel) | neck | about 7.5k ohms |
| 3-way toggle 1 (neck (up)), Neck volume down (neck full), Bridge volume up (bridge split), Neck tone up (neck reversed), Bridge tone up (series) | bridge north coil in series with neck | about 11.5k ohms |
| 3-way toggle 1 (neck (up)), Neck volume up (neck split), Bridge volume down (bridge full), Neck tone down (in phase), Bridge tone down (parallel) | neck north coil | about 3.8k ohms |
| 3-way toggle 1 (neck (up)), Neck volume up (neck split), Bridge volume down (bridge full), Neck tone down (in phase), Bridge tone up (series) | bridge in series with neck north coil | about 11.8k ohms |
| 3-way toggle 1 (neck (up)), Neck volume up (neck split), Bridge volume down (bridge full), Neck tone up (neck reversed), Bridge tone down (parallel) | neck north coil | about 3.8k ohms |
| 3-way toggle 1 (neck (up)), Neck volume up (neck split), Bridge volume down (bridge full), Neck tone up (neck reversed), Bridge tone up (series) | bridge in series with neck north coil | about 11.8k ohms |
| 3-way toggle 1 (neck (up)), Neck volume up (neck split), Bridge volume up (bridge split), Neck tone down (in phase), Bridge tone down (parallel) | neck north coil | about 3.8k ohms |
| 3-way toggle 1 (neck (up)), Neck volume up (neck split), Bridge volume up (bridge split), Neck tone down (in phase), Bridge tone up (series) | bridge north coil in series with neck north coil | about 7.8k ohms |
| 3-way toggle 1 (neck (up)), Neck volume up (neck split), Bridge volume up (bridge split), Neck tone up (neck reversed), Bridge tone down (parallel) | neck north coil | about 3.8k ohms |
| 3-way toggle 1 (neck (up)), Neck volume up (neck split), Bridge volume up (bridge split), Neck tone up (neck reversed), Bridge tone up (series) | bridge north coil in series with neck north coil | about 7.8k ohms |
| 3-way toggle 2 (both), Neck volume down (neck full), Bridge volume down (bridge full), Neck tone down (in phase), Bridge tone down (parallel) | bridge parallel with neck | about 3.9k ohms |
| 3-way toggle 2 (both), Neck volume down (neck full), Bridge volume down (bridge full), Neck tone down (in phase), Bridge tone up (series) | bridge in series with neck | about 15.4k ohms |
| 3-way toggle 2 (both), Neck volume down (neck full), Bridge volume down (bridge full), Neck tone up (neck reversed), Bridge tone down (parallel) | bridge parallel with neck | about 3.9k ohms |
| 3-way toggle 2 (both), Neck volume down (neck full), Bridge volume down (bridge full), Neck tone up (neck reversed), Bridge tone up (series) | bridge in series with neck | about 15.4k ohms |
| 3-way toggle 2 (both), Neck volume down (neck full), Bridge volume up (bridge split), Neck tone down (in phase), Bridge tone down (parallel) | bridge north coil parallel with neck | about 2.7k ohms |
| 3-way toggle 2 (both), Neck volume down (neck full), Bridge volume up (bridge split), Neck tone down (in phase), Bridge tone up (series) | bridge north coil in series with neck | about 11.5k ohms |
| 3-way toggle 2 (both), Neck volume down (neck full), Bridge volume up (bridge split), Neck tone up (neck reversed), Bridge tone down (parallel) | bridge north coil parallel with neck | about 2.7k ohms |
| 3-way toggle 2 (both), Neck volume down (neck full), Bridge volume up (bridge split), Neck tone up (neck reversed), Bridge tone up (series) | bridge north coil in series with neck | about 11.5k ohms |
| 3-way toggle 2 (both), Neck volume up (neck split), Bridge volume down (bridge full), Neck tone down (in phase), Bridge tone down (parallel) | bridge parallel with neck north coil | about 2.6k ohms |
| 3-way toggle 2 (both), Neck volume up (neck split), Bridge volume down (bridge full), Neck tone down (in phase), Bridge tone up (series) | bridge in series with neck north coil | about 11.8k ohms |
| 3-way toggle 2 (both), Neck volume up (neck split), Bridge volume down (bridge full), Neck tone up (neck reversed), Bridge tone down (parallel) | bridge parallel with neck north coil | about 2.6k ohms |
| 3-way toggle 2 (both), Neck volume up (neck split), Bridge volume down (bridge full), Neck tone up (neck reversed), Bridge tone up (series) | bridge in series with neck north coil | about 11.8k ohms |
| 3-way toggle 2 (both), Neck volume up (neck split), Bridge volume up (bridge split), Neck tone down (in phase), Bridge tone down (parallel) | bridge north coil parallel with neck north coil | about 2.0k ohms |
| 3-way toggle 2 (both), Neck volume up (neck split), Bridge volume up (bridge split), Neck tone down (in phase), Bridge tone up (series) | bridge north coil in series with neck north coil | about 7.8k ohms |
| 3-way toggle 2 (both), Neck volume up (neck split), Bridge volume up (bridge split), Neck tone up (neck reversed), Bridge tone down (parallel) | bridge north coil parallel with neck north coil | about 2.0k ohms |
| 3-way toggle 2 (both), Neck volume up (neck split), Bridge volume up (bridge split), Neck tone up (neck reversed), Bridge tone up (series) | bridge north coil in series with neck north coil | about 7.8k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume down (neck full), Bridge volume down (bridge full), Neck tone down (in phase), Bridge tone down (parallel) | bridge | about 8.3k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume down (neck full), Bridge volume down (bridge full), Neck tone down (in phase), Bridge tone up (series) | bridge in series with neck | about 15.4k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume down (neck full), Bridge volume down (bridge full), Neck tone up (neck reversed), Bridge tone down (parallel) | bridge | about 8.3k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume down (neck full), Bridge volume down (bridge full), Neck tone up (neck reversed), Bridge tone up (series) | bridge in series with neck | about 15.4k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume down (neck full), Bridge volume up (bridge split), Neck tone down (in phase), Bridge tone down (parallel) | bridge north coil | about 4.2k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume down (neck full), Bridge volume up (bridge split), Neck tone down (in phase), Bridge tone up (series) | bridge north coil in series with neck | about 11.5k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume down (neck full), Bridge volume up (bridge split), Neck tone up (neck reversed), Bridge tone down (parallel) | bridge north coil | about 4.2k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume down (neck full), Bridge volume up (bridge split), Neck tone up (neck reversed), Bridge tone up (series) | bridge north coil in series with neck | about 11.5k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume up (neck split), Bridge volume down (bridge full), Neck tone down (in phase), Bridge tone down (parallel) | bridge | about 8.3k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume up (neck split), Bridge volume down (bridge full), Neck tone down (in phase), Bridge tone up (series) | bridge in series with neck north coil | about 11.8k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume up (neck split), Bridge volume down (bridge full), Neck tone up (neck reversed), Bridge tone down (parallel) | bridge | about 8.3k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume up (neck split), Bridge volume down (bridge full), Neck tone up (neck reversed), Bridge tone up (series) | bridge in series with neck north coil | about 11.8k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume up (neck split), Bridge volume up (bridge split), Neck tone down (in phase), Bridge tone down (parallel) | bridge north coil | about 4.2k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume up (neck split), Bridge volume up (bridge split), Neck tone down (in phase), Bridge tone up (series) | bridge north coil in series with neck north coil | about 7.8k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume up (neck split), Bridge volume up (bridge split), Neck tone up (neck reversed), Bridge tone down (parallel) | bridge north coil | about 4.2k ohms |
| 3-way toggle 3 (bridge (down)), Neck volume up (neck split), Bridge volume up (bridge split), Neck tone up (neck reversed), Bridge tone up (series) | bridge north coil in series with neck north coil | about 7.8k ohms |
Readings assume typical pickups. Yours can be off by 15 percent or so and still be fine.
If a reading is off
- 0 in every position: the hot run touches ground somewhere. Look for a stray strand or a solder blob.
- No reading in a position that should play: a joint is open. Reflow the joints on that pickup's run.
- A two-pickup position reads like one pickup: one of them isn't connected on the switch.
- Readings are right but a two-pickup sound is thin and quiet: the pickups are out of phase. Swap one pickup's hot and ground leads.
More like this
Stock Les Paul style
A volume and a tone for each pickup on a 3-way toggle. Pick 50s or modern tone wiring later.
Split both humbuckers
Pull either tone knob for a single coil sound from that pickup.
Series or parallel
Pull either tone knob to put that humbucker's coils in parallel: brighter, still quiet.
Shielded Les Paul style
50s wiring with copper foil in the control cavity against hum and buzz.